|
Product Details:
|
| Material: | Black Awiation Auminum |
|---|
MNC series non-contact laser tool setting instrument,using focused laser design,can detect the minimum diameter of 0.03mm tool,at the same time with machine bed tool setting,tool detection and automatic compensation functions.Tool length,tool diameter and toolswing can be detected,including multi-tooth cutter tooth damage;The tool offset error can be automatically updated,and the thermal deformation of the spindle can be monitored and compensated It can be tested ata very high speed to reduce the detection time.
Production Parameter:
Productnam | Laser tool setting instrument | ||
Model | MNC56 | MNC86 | MNC168 |
Centralized measurement of tool diameter range | 0.03-50mm | 0.03-80mm | 003-160mm |
Tangent measurement tool diameter range | 003-60mm | 0.03-110mm | 0.03-320mm |
Maximum repetton accuraoy | 0.1μm(Depends on the system,interval,and instllation) | ||
Conventional subsynthesis acouracy | 1μm | ||
Laser type | Power <1mW,wavelength 680nm | ||
Laser beam acouracy | There is an adustable mountng plate for adustment | ||
Power voltage | 50mA@24VDC | ||
power protection | Recoverable protection,replaceable fuse | ||
Output signal | Maximum curent 50mA,maximum voltage±50V | ||
Sgnal transmission mode | 5M,8-core shielded twisted pai,oil resistant | ||
Air source | 4mm tache | ||
Life span | 1mllion switchoydes | ||
Sealgrade | P68 can reach the sub-standard with or without compressed air) | ||
The fuselage materia | Awiation auminum | ||
Storage temperature | 10℃-70℃ | ||
Morking Temperature | -5℃~50℃ | ||
application | |||
Used in various vertcaland honzontal machining centers,vanous GANty machining centers andmultfunctionalmachine tools | |||
for high-speed,non-contact tool damage detection of solid tools | |||
