|
Product Details:
|
Plunger tool setting instrument (can be used as contact sensor),mainly used for small mini engraving machine, dispensing machine,denture machine,tooth carving machine broken knife detection,tool wear and damage detection.
| Product name | Plunger tool setting instrument |
| Repeatabilty | 0.001mm |
| Stroke | 3mm |
| Operating Force | 06N |
| Operating position | 0.2-0.5mm |
| Retum difference | below 0.1mm |
| Power Voltage | DC5-24V |
| Output model | NPN (NO)(ON/When cose to ON) |
| NPN(NC) (OFWhen dose to OF)(BModel Tal B) | |
| Output current | 15mAMAX |
| current consumptor | 5mAMAX |
| Specification of cable | 1m Length,NO:Grey;NC:Black;ψ28mm |
| Withstanding Voltage | AC 1000V1 1Minute |
| Insulation Resistance | DC250V220MQ |
| Pilot Lamp | 100mm/About 100mm from the main body |
| Material | Housing/hutshaft:SUS303 |
| Install | /M8 nut mounting pitch 5N |
| Net weight | 24g |
| Gross weight | 25g |
| Protection Glass | IP67 equivalent |
| Working Temperature | -20ºC-85ºC(No condensation) |
| Working Relatve Humidity | 20~95%RH |
