|
Product Details:
|
Product Parameters
| Product Name | High Precision Automatic Tool Setter |
| Product Model | M26D-30 Series |
| Signal output | NO normally open/NC normally closed |
| Counterbore Diameter | 30mm |
| Material | Tungsten steel super hard alloy |
| Surface treatment | Grinding 4S mirror |
| Repeatability | 0.001mm(Condition:Operating speed 50-200mm/min) |
| Contact life | 3 million times |
| Contact strength | 1N (mounting condition must be vertical) |
| Pre-travel | 0mm |
| Travel | 8mm |
| Contact Nominal Value | DC5-24V/20mA(MAX) Recommended value 10mA Resistance load |
| Cable Specification | Standard 5m oil resistance (length can be customized) |
| Waterproof rating | 8mm/304 stainless steel/1.5m length, tensile length 30N bending radius R7 |
| Net Weight | 536g |
| Gross Weight | 612g |
| Overtravel Alarm Signal | Output Mode:NC/Normally Closed(Emergency stop when signal is disconnected/Normally Open can be ordered) |
| Contact Voltage:DC24V/20mA Resistance Load | |
| (Special case must add load, limit current) |
Contact Person: Mr. 孙海龙
Tel: 86-755-83216312
